-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
Overview
FlightLine Spitfire Mk.IX 1600mm (63") Wingspan - PNP - FLW303P
The Supermarine Spitfire is one of the most popular warbirds in history. This British single-seat fighter was used famously by the Royal Air Force and the Allies, earning distinction during the Battle of Britain and throughout World War II. Over 20,300 aircraft were produced with more than 24 variants. The Spitfire’s versatility and maneuverability in the hands of skilled pilots made it a lethal weapon against Axis forces. The timeless Spitfire continues to fly in modern times as a tribute to aviation history and military veterans.
After a large outpouring of requests from customers to upsize its smaller 1200mm Spitfire, FlightLine’s 1600mm wingspan Spitfire Mk.IXc is approximately 1/7 scale and an entirely larger beast with all the bells and whistles we’ve come to expect from aircraft in the 1600mm Class. This Spitfire is molded from EPO foam, featuring a scale shape and smooth surface. The main wing is assembled from hollow foam parts and an interlocking plywood and carbon fiber frame, providing lower weight and higher strength than a solid foam wing. The main wing and horizontal tail are attached with screws for very convenient transport, and proper ventilation is also designed to keep the electronics cool. The large battery hatch and removable battery bay floor provides easy access to an organized battery and receiver compartment, including space for an optional flight stabilizer gyro.
This elegant model aircraft is equipped with a 5055-390KV brushless outrunner motor, 80A ESC, and scale 4-blade propeller. With the recommended 6S 4000-5000mAh lipo battery, the Spitfire MK.IXc has a level top speed of 125kph/75mph, with tall vertical power and 6-10 minutes of flight time depending on throttle management. Delivering capable grass handling performance, the main landing gear use shock absorbing Oleo struts, a main wheel diameter of 85mm, and a tail wheel diameter of 45mm. Metal reinforcement plates, 5mm thick steel strut pins and axles, and metal trunions work together with the suspension struts and soft wheels to dampen the forces caused by operating this aircraft on rough runways. The FlightLine 1600mm Spitfire Mk.IXc was optimized for sport scale performance, gentle handling, and an almost effortless flying experience, suitable for intermediate pilots and above. Importantly, a very predictable stall and power on recovery make the aircraft easy to control throughout all stages of flight. Day-Bright LEDs also aid in visibility of this large and beautiful foam electric model aircraft.
Visit the Official FlightLine 1600mm Spitfire Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- Grass capable landing gear with suspension struts and 5mm thick steel pin and metal trunion
- Scale four panel split flaps
- Big 16x10 Propeller, 5055-390KV brushless motor and 80A ESC with EC5 connector
- LED wingtip lights and dorsal signal light
- 17g digital hybrid servos, brass ball links, and nylon hinges on all control surfaces
- Machine Screw Inserts molded into the spinner backplate to easily adjust blade tracking while mounted on the motor
- Removable wings, cannon, and antenna for easy transport
- Central Control Board for organized wiring
- Access holes to adjust Elevator/Rudder linkages without removing the wing
- Gyro ready plywood area near CG location
- Additional decals sets are made available by Callie Graphics, including George Beurling, Pierre Clostermann, etc.
Includes:
- FlightLine Spitfire Mk.IX 1600mm (63") Wingspan - PNP
- Motor, ESC, servos, LED lights and retracts pre-installed
Requires:
- 6 Channel Radio - Select a minimum 6 channel radio from our Radio Collection
- 6 Channel Receiver - Select a minimum 6 channel receiver from our Receiver Collection
- 6 Cell 22.2V 4000 to 6000 mAh LiPo battery with EC5 connector – we recommend Admiral 6 Cell 6000 mAh LiPo battery
- 6 Cell Compatible Battery Charger - Select a minimum 6 cell (6S) charger from our Charger Collection
Product Specifications:
Wingspan |
1600mm / 62.99in |
Length |
1350mm / 53.1in |
Flying Weight |
2850g / 100.53oz |
CG (Center of Gravity) |
90mm from the leading edge of the wing at the root |
Power System |
5055-390Kv Brushless Outrunner Motor |
Electronic Speed Control |
80A Brushless with EC5 connector |
Propeller / EDF |
16x10 4 Blade Propeller |
Servos |
|
Landing Gear |
Electric retracts with metal trunnions |
Required Battery |
6 Cell 22.2V 4000 to 6000 mAh LiPo battery with EC5 Connector |
Required Radio |
6+ Channel 2.4GHz |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
Split Flaps |
Lights |
Yes |
Hinge Type |
Nylon reinforced |
Material |
EPO Foam |
Skill Level |
Intermediate |
Build Time |
1 Hour |
Recommended Environment |
Outdoors |
Videos
Product Videos
Spare Parts
Product Spare Parts
0 - 32 of 44 results
Upgrades
Product Upgrades
Eagle A3 Super 3 Standard Edition 6-Axis Airplane Gyro with Programming Card
SKU: HEA3S3FS
$6699
Sold out
1 - 10 of 10 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
- FlightLine 1600mm Spitfire Mk.IX Instruction Manual
- FlightLine 1600mm Spitfire Mk.IX Decal Placement Sheet
Product Updates:
- September 11, 2018 - The FlightLine 1600mm Spitfire recommends a 6S 5000 mAh Lipo, but can be flown on an equivalent weight 4S pack at a higher throttle setting. Extra special care for CG must be taken, since the 6S 5000 is typically pushed all the way forward, meaning a 4S would need to be an equivalent weight.
- August 9, 2018 - For modelers with access to a 3D Printer or who want to use a third party 3D printing service, we are offering for a limited time the original .STL files for free download. Modelers are responsible for preparing the file for their own printer’s specifications. These downloadable files are ideal for modelers who enjoy tinkering with printer settings and materials. Please note, we only provide the .STL files themselves; we cannot provide tech support for your specific printer. By downloading the .STL files, you agree to not monetize the file in any way without Motion RC’s express written consent. If you have your own 3D printer, or have access to one, you can download the STL files directly from this link:
- Spitfire Clipped Wing Conversion and Cockpit .STL Files
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
- Regular price
- $42900
- Sale price
- $42900
- Regular price
- $47500
- (Save $46.00)
- Unit price
- per
